McFarlane Aviation Products ORDER ONLINE NOW!
Or Call 1-866-920-2741
M-TH 7:30am-5:30pm CT
F 7:30am-5:00pm CT
Quick Search      Search Tips

    
Your Shopping Cart
You Have 0 Items in Your Cart
Subtotal  $0.00
View Cart Check Out Help
Login Package Tracking Purchase Options
Part Number: MC0750112
Description: SHAFT (Carburetor Heat Box)
FAA-PMA
PMA Supplement 8
Qty per Aircraft: 1
Unit of Measure: EACH
Retail Price: $446.01
Inventory Status: Stock
Your Discount Price: $148.67
Qty EACH

Please verify eligibility for your aircraft
Product Image

Control Arms, Shafts and Bearing Housings for Cessna Aircraft
Unique elastomer bearing replaces needle bearing

McFarlane's elastomer bearing is assembled with tension between the mating surfaces. This tension prevents micro-movement and its related metal erosion. The bearing contact area that transfers vibration motion from the heat box to the butterfly shaft is hundreds of times greater than that of the original needle bearing. This large surface effectively prevents localized metal erosion.

  • Absorbs shaft and butterfly vibration
  • Eliminates needle bearing failures
  • Increases service life of all components
  • Direct replacement for original parts

Proven Design

  • Tested to over 700,000 cycles while exposed to avgas, heat and vibration without any change in performance
  • Extremely rugged and wear resistant in high temperature and fuel environments

Convenient

  • Discontinued part numbers through the factory are now manufactured by McFarlane
  • Shafts, arms, bearing housings, monel rivets and roll pins are also available separately or in kits  

The carburetor heat box suffer more from engine vibration than other parts of the engine installation due to the distance of its location from the center of the engine. Engine vibrations, which are small back and forth movements of the engine about a point of rotation in the engine, become larger and more severe as the distance increases from the center of these movements. A fraction of an inch of engine movement near the center of the engine could result in over an inch of movement in an attached component that is located a considerable distance from the center of the engine. This phenomenon can be visualized by imagining what would happen if a five foot broom handle was solidly attached to an idling aircraft engine. The far end of this broom handle would oscillate wildly back and forth as the engine moved slightly. This is similar to what is happening to the carburetor heat box. Normal engine vibrations are amplified by the distance (arm) from the center of the engine.

Ordinary needle bearings are not well suited for this high vibration environment as they concentrate the energy of vibration movement to the very small area where the needles contact the heat box butterfly shaft. This concentrated kinetic energy results in metal loss and grooves being worn into the shaft with eventual failure of the bearing system. Needle bearing failure can lead to ingestion of loose needles into the engine induction system and cylinders.


 

Alcor Instruments and Probes | APS BlackSteel Brake Discs & Linings | Baffle Seal Material | Bearings | Brake and Wheel Components | Brownline Seat/Cargo Tracks | Bushings | Cable, Bulk | Cables and Chains, Flight Control | Cables, Door and Step | Carb Heat Parts | Controls, Push Pull | Curtis Superior Valves | Drain Valves, Fuel and Oil | Electronic Components | Exhaust System | F. Atlee Dodge Products | Flap System Components | Fuel System Components | Gaskets and Seals | Hardware, Standard | Hinges | Knots 2U Products | Landing Gear Components | Metal Bundles | Miscellaneous | Oil Coolers | Plastic and Fiberglass Parts | PMA Products, Inc. | PROP GUARD Anti-Abrasion Boot | Pulleys | Rudder Pedals | SAF-AIR Fuel and Oil Drain Valves | SAFE-HEET Engine Pre-heaters | Seat Rails and Seat Components | Skins, Control Surface | Steering Rods, Boots, & Doublers | Stene Aviation Products | Texas Aeroplastics Products | Tools | Universal Joints, Control Yoke

MARPA Site
McFarlane Aviation
©2004-2014 McFarlane Aviation, Inc. All rights reserved.
Terms and Conditions of Sale | Terms and Conditions of Use | Privacy Statement | Request a Catalog | Master Product List

McFarlane Aviation