Alcor Leads
CHT Leads:
CHT Type J Black and Yellow
P/N
Resistance
Length
42535
7.76 +/- .20 Ohms
90"
42536
144"
42543
216"
42537
240"
EGT/TIT Leads:
EGT Type K Red and Yellow
42525
4.34 +/- .08 Ohms
42526
2.71 +/- .06 Ohms
42528
6.52 +/- .11 Ohms
42527
7.25 +/- .12 Ohms
Calibration note: EGT gauges with relative lean to peak markings may be easily recalibrated in flight per the instructions provided with the gauge. TIT, CHT and EGT gauges with True Temperature markings must either be recalibrated with an Alcal System Tester or returned to Alcor for recalibration if the total lead and probe resistance does not match the gauge calibration.
Digital or amplified gauges from other manufacturers are not sensitive to lead resistance, therefore leads may be shortened as needed for these applications without requiring recalibration.
Alcor Instruments and Probes | Baffle Seal Material | Bearings | Brake and Wheel Components | Brownline Seat/Cargo Tracks | Bushings | Cable, Bulk | Cables and Chains, Flight Control | Carb Heat Parts | Controls, Push Pull | Electronic Components | Exhaust System | F. Atlee Dodge Products | Flap System Components | Fuel System Components | Gaskets and Seals | Hardware, Standard | Hinges | Knots 2U Products | Landing Gear Components | Metal Bundles | Miscellaneous | Oil Coolers | Plastic and Fiberglass Parts | PMA Products, Inc. | Prop Guard Anti-Abrasion Boot | Pulleys | Rudder Pedals | SAF-AIR Fuel and Oil Drain Valves | SAFE-HEET Engine Pre-heaters | Seat Rails and Seat Components | Skins, Control Surface | Steering Rods, Boots, & Doublers | Stene Aviation Products | Texas Aeroplastics Products | Tools | Universal Joints, Control Yoke