McFarlane Aviation Products FAA-PMA Replacement Aircraft Parts

Rotax Controls

Controls for Dual Carburetor 912/914 Series Rotax Engines
Allows a neat, clean installation without a clunky splitter box

Quality metal construction and high temperature Teflon lined conduit for smooth, consistent control
(Cheapy controls with poly liners will not tolerate engine temperatures)
Available in 4, 6, 8, 12 foot and custom lengths
- Easily trimmed to length
Manufactured to the same quality standards as McFarlane's FAA-PMA parts
Not for use on certified aircraft, or for flight controls or flight control trim tabs

Throttle Controls:

Flexible 1/16 1x7 stainless steel twisted inner wire
Versatile threaded conduit terminals for easy adjustment (M6x1 x 1" thread)
Adjustable cable stops to limit travel

Panel Mount (MCT100D series):

Super smooth friction lock
Two knob options (ball or standard barrel shape)
Go to Panel Mount Throttle Controls for more details

Quadrant Style (MCQ100D series):

Convenient dual conduit clamp for simple quadrant mounting
Viton boot to dampen vibration and seal out dust on the quadrant end
Go to Quadrant Style Throttle Controls for more details

Vernier-Assist (MCTV0005D and MCVA0005-30DLLL series):

New roller action vernier provides smooth jam-proof coarse and fine adjustment without a release button
Light-weight and compact behind the dash
Go to Vernier-Assist Throttle Controls for more details

Choke Controls:

Flexible 1/16 1x7 stainless steel twisted inner wire
Includes two adjustable cable stops to attach to the carb choke arm (no swaging or soldering necessary)
Many knob styles

Turn-to-Lock (MCTL1014D series):

Turn-to-lock mechanism that requires a quarter turn of the knob to lock or unlock the control at any position.
Go to Turn-to-Lock Choke Controls for more details.

Non-Locking (MCC101D series):

Internal elastomer seal to dampen vibration and provide a small amount of resistance.
Go to Non-Locking Choke Controls for more details.

Less Detail

Question
How do I clean and sanitize a McFarlane Push-Pull Control? We make the following cleaning and sanitizing recommendations to be completed between flights: Recommended Cleaning Process 1. Put on clean disposable gloves prior to cleaning and disinfection. 2. Pull controls back to the fully retracted position to expose the full length of the control shafts. 3. Apply isopropyl alcohol to a clean microfiber towel. Do not spray any solution directly on the controls or any other surfaces or components in the aircraft. !!! WARNING: DO NOT USE BLEACH WIPES ON ANY MCFARLANE CONTROL !!! 4. Gently and thoroughly wipe down every control knob surface and control shaft. 5. Let cleaning solution dry on these surfaces (contact time). 6. Use a clean and dry microfiber cloth to wipe away any solution residue left on knob and control shaft surface. 7. Remove all gloves, towels, and cleaning supplies from the work area in the aircraft. Please contact McFarlane Sales directly at 866-920-2741 or 785-594-2741 or sales@mcfarlaneaviation.com if you have any additional questions regarding the disinfection of our controls.
How do I trim my engine control to length? Please reference the Installation Instructions included with your new control.
I purchased a laser engraved knob and the thickness of the marking is very shallow. What kind of wear resistance can I expect? The laser marking does not harm the hard durable anodize coating on the aluminum knob. The CO2 laser process only bleaches the color from the anodizing leaving a silver white color that contrasts with the surrounding dyed anodize. The durability of the laser marked area is not affected by the laser. Our tests have shown that the laser process actually improves the corrosion resistance of the anodize layer. The CO2 laser engraves aluminum knobs by vaporizing the surface leaving a deep durable groove. This groove is then filled with a special paint for contrast. The result is a durable long lasting mark.
My Vernier-Assist Throttle control came apart during installation or maintenance. Can it be put back together? Yes, this is common and can put back together, provided no components are missing. Please watch the Vernier-Assist Assembly Video for details.
What is the minimum bend radius for my engine control? McFarlane's Storage and Packaging Specification requires a specific packaging minimum radius based on the length of the control, type of wire used, and the configuration of the control end(s). Please contact us to determine the exact requirements for your specific control.
Why is my new engine control too long/short? There are several things that could be different such as engine/aircraft modifications, rigging/clocking of control arm or adjustment of rod end will be needed, placement of clamps or brackets may be different, or a previous installation change such as routing from original.

Not finding what you're looking for?

Try one of the following: