SAFE-HEET Engine Heaters



Silicone Pad Aircraft Engine Heater
Preheat in cold weather for longer engine life
Heats the entire engine!



Easy to Use

  • Permanent installation - thin, flexible pad bonds to engine oil sump
  • FAA-PMA for Continental, Lycoming and Franklin engines
  • No STC or Form 337 required (log book entry only)
  • No engine or airframe modifications required
  • Includes instructions and all necessary materials
  • Can be used alone or with a timer or temperature controller
  • 110V AC
  • Industry-leading 4-Year Warranty


Economical and Efficient

  • Puts the heat where it is needed
  • Heats the air inside the engine
  • Uses about 300 Watts (less than the price of a cup of coffee a day!)
  • Warms the engine oil from subzero to safe starting temperature in less than one hour
  • Thermally conductive adhesive for efficient heat transfer and lower surface temperatures
  • Bonded heatsink distributes heat evenly
  • Reduces costly starter and engine abuse during cold weather starts



  • UL recognized components. 100% thermal fused element
  • External ground wire grounds the engine and airframe to the electrical outlet, reducing the risk of electrical shock in damp outdoor locations
  • Thermostatically controlled to maintain oil sump temp less than 160 degrees F
  • No flame or hot air to burn cowling or plastic parts
  • Reduces the risk of fires associated with cold starts
  • Ground Fault Circuit Interrupter (GFCI) included to reduce the risk of electrical shock and power surge damage 



P/N Dimensions Watts
700 4 inch x 4 inch 200 Watts
705 7.5 inch x 3.5 inch (diamond)  150 Watts
720 7 inch x 4 inch 300 Watts


Installation Tip:
SAFE-HEET engine heaters are installed with a two-part adhesive. The engine heater can be installed quickly and easily by using the 707 temperature controller at half power. At temperatures below 70 degrees F the temperature controller must be used to ensure proper adhesive cure. Proper adhesive cure is essential to service life of the heater.

AeroShell Oil and Tempest Oil filters also available. 

Not finding what your looking for?

Try one of the following: