McFarlane Aviation Products FAA-PMA Replacement Aircraft Parts

Templates

Templates make the job of transferring the original Cessna rivet hole pattern from the old seat rail to the new seat rail easy!

Inexpensive
Achieve a precise fit every time

One template per seat rail is required

SRTEM1 = 1.5" x 38.0" x 0.025"

SRTEM2 = 2.25" x 30.0" x 0.025"

SRTEM3 = 1.5" x 58.63" x 0.025"

SRTEM4 = 1.5" x 71.5" 0.025"

Models 150-152 do not require templates as the screw holes are predrilled. Model 177 Cardinal seat rails require one (1) SRTEM3 templates per rail. Seat rail series MC0511240, MC0511243, MC0514209 and MC2414002 use SRTEM2. All other rail series use SRTEM1.

To use the templates:

Clamp the template to your old seat rail.
Drill holes through the holes in the old seat rail into the template.
Clamp the template to the new seat rail and drill several holes through the template and new seat rail.
Set the new seat rail in position in the aircraft and check for proper seat rail alignment. The seat rails must be properly aligned and parallel with each other.
Clamp the templates again to the new seat rail and make any required alignment adjustments discovered during the aircraft test installation.
Drill all of the required holes through the template and the new seat rail

To view similar products for your aircraft go to Seat Rails and Seat Rail Components.

Custom Seat Rails also available.

Less Detail

Title	Document Type
FAA Airworthiness Directive 2011-10-09 Cessna Seat Rails	FAA Airworthiness Directives (AD)
SAIB CE-90-03R2 Concerning the use of screws in place of rivets when replacing seat rails	FAA Special Airworthiness Information Bulletins (SAIB)
How to Install McFarlane Seat Rails	Installation, Use, and Maintenance Instructions
How to Use McFarlane Seat Rail Templates	Installation, Use, and Maintenance Instructions
The Ins and Outs of Articulating Seats	Maintenance and Product Guides
2007-10-25 Cessna Cardinal Seat Rails	Press Releases

Not finding what you're looking for?

Try one of the following: