Starlight Bulb Replacement

StarLight wing ice inspection light was engineered with your safety in mind. Low-lying clouds and sub-zero temperatures can create hazardous ice formations on the wings of your aircraft. This LED ice detection lighting system (or wing inspection/wing scan light) provides optimum illumination of your wing to check for the formation of ice. StarLight offers more total light output (lumens) and a wider beam spread to give you the optimum amount of light needed. It also provides added visibility to your aircraft for collision avoidanec and recognition. StarLight serves as an easy replacement for incandescent 7079 light bulbs.  

LED bulb replacement must be installed in an existing approved light housing in a BAY15S socket. The StarLight LED bulb replacement is designed with a single high-power LED. Should the LED fail, the unit must be replaced.

Direct drop-in replacement for:

WA7079B-24, NLI7079-24, CMA-7079B-24, A7079B-24, A7079-24, A70798-24, A7979B24, 60-4416-1, ML7079-24, UA-7079B-24, 972.72.54.605, WL-A-7079B-24, MS25338-7079, MS25338-617, MIL-L-6363/, 6240-01-262-0145

Technical Specifications:

• Voltage: 24V
• Lumens: 520
• Candela: 3,700
• Power: 5W Max
• Weight: 1.4 oz
• Dimensions: 1.1" x 1.5" x 2.2"
• Built in thermal protection

Learn more about AeroLEDs.

AeroLEDs offer high efficiency, direct replacement LED lighting for hundreds of aircraft. AeroLEDs are light weight, shock and vibration resistant, and have low drag. LED lighting easily lasts over 50,000 hours of continuous operation with no reduction by on/off cycles, with up to 80% reduced power consumption. The built-in Pulse Mode and synchronization blink the light on and off at a 1Hz rate when power is applied to the Pulse Mode power wire. Higher color temperature provides superior visibility and clarity.   

• GE to AeroLEDs Cross Reference
• Catalog Information 

Increased Safety

AeroLEDs lights allow you to comply with the latest FAA recommendations (Operation Lights On) regarding extended use of taxi, landing and anti-collision lights without fear of reduced light performance or life. They all feature optimized light color (6500k sunlight equivalent) for proven superior air-to-air recognition. The landing lights also feature a pulsed recognition light mode. 

Reduced Power Consumption

High efficiency LED lights use less than 1/3 the power of halogen bulbs. They significantly reduce the load on the electrical system and they will not dim due to low voltage typical of low RPM final approaches when you need them most!

Longer Life - Zero Maintenance

All AeroLEDs products are designed to be a "lifetime buy." They last over 50,000 hours when properly installed and do not degrade with on/off cycles. They are extremely rugged and hardened against all kinds of electrical damage, shock and vibration. 

Pulse Recognition Mode

AeroLEDs lights with pulse mode (or wig-wag mode) greatly improve safety by alternately blinking the left then right light once per second. This dramatically increases your aircraft visibility to prevent both air and ground collisions. At least one 36HX or 46HX series light must be installed to enable pulse mode. 

Learn more about AeroLEDs.