Tailwheel Shimmy Dampener
FAA-PMA Approved Tailwheel Shimmy Dampener
A compact and lightweight assembly that hydraulically dampens oscillations in the tailwheel to eliminate tailwheel shimmy and stabilize your tailwheel. The tailwheel shimmy dampener is designed to compensate for improper tailwheel caster angle, reduce internal tailwheel assembly friction, and poor tail wheel maintenance.
- Smooth landings
- Reduced aircraft wear and tear
- No headache installation and maintenance
- Includes STC
Other Considerations:
- Not compatible with the T3 Tailwheel Suspension
- A long pawl (ABI3219-02) assembly is REQUIRED.
- Installation of the tailwheel shimmy dampener on Cessna 170 aircraft with 3200 Series tailwheel assemblies requires and aircraft-specific leaf spring adapter plate.
Which tailwheel do you need? Follow the simple 2-steps below!
Step 1.) Select your tailwheel assembly to find the base shimmy dampener part number:
|
Tailwheel Assembly
|
Base P/N
|
|
3200 Bent Assembly
|
KEG-117
|
|
3200 Straight Assembly
|
KEG-116
|
|
3200-3 2 Hole Straight Assembly
|
KEG-118
|
|
3400/3450 Bent Assembly
|
KEG-111
|
|
3400/3450 Straight Assembly
|
KEG-112
|
|
3450-23 2 Hole Straight Assembly
|
KEG-113
|
Step 2.) Select additional options:
| If KEG-116 or KEG-117: |
Full P/N
|
|
|
Select your tail spring width
|
KEG-116
|
KEG-117
|
| 1-1/4" | ||
| 1-1/2" | ||
| 1-3/4" | ||
| Cessna 170 Adapter Plate | ||
| If KEG-111 or KEG-112 |
Full P/N
|
|
|
Select Tailwheel
|
KEG-111
|
KEG-112
|
| ABI Tailwheel | ||
| SCOTT Tailwheel | ||
| If KEG-118 or KEG-113 |
Full P/N
|
|
|
No additional options
|
||
Warranty Policy: Warranty protection, when offered, will vary between manufacturers and products lines. Please contact customer support for any warranty claims.
For ordering information, go to Tailwheel Shimmy Dampener.