Seat Rail Wear Gauge
Seat Rail Wear Gauge for Cessna Aircraft
Fast and Positive - No more guessing!
For checking seat rail wear limits as per FAA Airworthiness Directive 2011-10-09, Effective 06/17/2011 Seat Rail Directive and its predecessor A.D. The gauge is used for inspection of seat rail wear in Cessna aircraft. This gauge is designed to measure the actual radius wear near the seat stop holes. Notice the different sized step the corner. The size applies to the .42 diameter limits referred to by the A.D. The .020 upper surface wear allowance allowed by the A.D. is designed into the gauge.
Directions for using the Seat Rail Hole Wear Gauge
Note: Earlier versions of the McFarlane seat rail wear gauge feature a .36 and a .42 step. The .36 step was included per an earlier version of the A.D. and is no longer used. Existing gauges may still be used to check wear limits per the new A.D. Future production runs will not include the .36 part of the gauge.
For easier installation of seat rails, we also offer Seat Rail Templates, Rivet Kits, Screw Kits and Spotface kits. For guidance on the replacement of fasteners, see FAA Special Airworthiness Information Bulletin CE-90-03R2.
Articulating Seats - The Ins and Outs of Articulating Seats by Dennis Wolter
*Reprinted with the permission of the Cessna Pilots Association, April 2012 Issue.
| Title | Document Type |
| The Ins and Outs of Articulating Seats | Maintenance and Product Guides |
| Seat Track Wear Gauge Instructions | Installation, Use, and Maintenance Instructions |
| SAIB CE-90-03R2 Concerning the use of screws in place of rivets when replacing seat rails | FAA Special Airworthiness Information Bulletins (SAIB) |