Your Cart
Items
D A M Exhaust Lubricant
D A M Aircraft Exhaust Anti-seize/Lubricant — The only anti-seize that works!
D A M Exhaust Lube is designed specifically for aircraft exhaust ball joints, clamps, slip joints, and hardware. A low viscosity liquid is blended with molybdenum-disulfide and other special micro-lubricants to produce a protective dry lubricant film. This film embeds into the stainless steel and keeps your joints lubricated for years!
- Protects up to 2400° F
- No stainless corroding graphite
- Prevents heat corrosion and joint lockup
- Joints stay free to move with thermal expansion
- No greasy powdered metal paste that locks up anyway
- Low viscosity — a little goes a long way
- Loosens assembled joints
Note: Do not use an anti-seize that contains graphite on your exhaust systems. Graphite corrodes and destroys the grain structure of stainless steel. D A M™ Exhaust Lube does not contain graphite.
Directions:
- Shake well.
- Pre-assembly: Clean joint and apply a wet coat to both surfaces to be joined. The joint can be assembled wet or dry.
- Assembled joints: Apply several times to joint edge. Allow time for capillary action to penetrate the joint. For better penetration of locked up joints, mix 50/50 with acetone, MEK, toluene, or similar solvents.
FOR BEST RESULTS, APPLY BEFORE ASSEMBLY
(Can also be applied to joint edges on older assemblies)
Shipping Note: This product can only ship via UPS Domestic Ground service. Air and International shipments are not available at this time.