Your Cart
Items
Free Shipping on orders over $500.00
Part # 68-2290005-30
LENS, Clear, A612
Product Details
Specifications
- Approval
- Condition
- New
- Manufacturer
- Whelen Aerospace Technologies
- Dimensions
- L: 4.5 x W: 3.25 x H: 3.5 in
- Weight
- 0.5 lbs
- Unit of Measure
- Each
- McFarlane Part Number
- 68-2290005-30
Application
Universal Part
Universal part. Sizing customizable to fit your needs.
Product Description
A612 Standard Clear Lens
Glass replacement lens for A610 (P/N 02-0250276-00) Flash Tube Assembly, used for installing wing tip strobes in single engine Cessna 1972 and later. The existing position light retainer is modified to accommodate the lens, with the flash tube mounted directly behind. This item may be used for custom installations or as spare parts for existing light assemblies.
A612 Lens is used with the A650, A625, A650 PG/PR, as well as Legacy A600 PG/PR and 70821 Whelen model assemblies.
Technical Specifications:
- Weight: 0.08 pounds (36gm)
- Dimensions: H 1.6" (40.64mm) x Diameter 1.75" (44mm)
Drawing Number A612: 90005
Drawing Number A610: 50276
WARNING: Cancer and/or Reproductive Harm - California Proposition 65 Resources
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Eligibility Chart |
|---|---|---|---|---|
| Many Many | Many | S/N 0 – ZZZZZZZZZZZZZZZ | ZZZZZZZZZZZZZZZ | Eligibility Chart 1546 |
FAQs
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light and a strobe that covers 180 degrees from each wing tip.
The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the SunSpot 36 and 46?
The SunSpot 36LX landing and taxi lights and SunSpot 46LX can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers.
The SunSpot 36HX landing and taxi lights and SunSpot 46HX can be installed with the pulse function enabled in any model listed on the AML under STC, or in other aircraft models with a 337 that uses the AML STC as a basis for approval.
What are the installation requirements for the TSO lights?
If the lights are mounted to an existing mounting location with no structural modifications and existing wiring can be re-used, the lights can be installed with a log book entry.
If there are modifications to the wiring, a 337 should be submitted for approval for the installation.
If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What is the recommended wire for the Pulsar and SunTail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire.
