Your Cart
Items
Free Shipping on orders over $500.00
Part # MC0411090-22H
CONTROL (Cabin Heat)
Product Details
Specifications
- Approval
- FAA PMA
- Condition
- New
- Manufacturer
- McFarlane Aviation
- Dimensions
- L: 20 x W: 20 x H: 3 in
- Weight
- 2 lbs
- Unit of Measure
- Each
- McFarlane Part Number
- MC0411090-22H
Product Description
Cabin Environment Controls for Cessna Aircraft
Longer life and improved design
McFarlane has FAA-PMA approval on the cabin air, cabin heat, cabin vent, cold air and defrost controls for many single engine Cessna aircraft. All of these controls feature McFarlane's improved push-to-unlock mechanism with greater holding strength and longer life. Most knobs match originally equipped knobs.
- Special, heavier wire for more fatigue strength and reliability
- Improved push-to-unlock mechanism on MCS P/Ns = more holding strength
- Reduced vibration wear and longer life!
- High temperature Teflon lined conduit
WARNING: Cancer and/or Reproductive Harm - California Proposition 65 Resources
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Quantity Per Aircraft | Location | Eligibility Chart |
|---|---|---|---|---|---|---|
| Cessna 175 | 175 | S/N 55001 – 55703 | 55703 | Quantity Per Aircraft 1 | Location CABIN HEAT | Eligibility Chart 1337 |
Cross Reference
Reference only: Please verify the product is eligible for your aircraft before adding to your cart.
-
0411090-22
FAQs
Why is my new engine control too long/short?
What is the minimum bend radius for my engine control?
McFarlane's Storage and Packaging Specification requires a specific packaging minimum radius based on the length of the control, type of wire used, and the configuration of the control end(s). Please contact us to determine the exact requirements for your specific control.
How do I trim my engine control to length?
How do I clean and sanitize a McFarlane Push-Pull Control?
We make the following cleaning and sanitizing recommendations to be completed between flights:
Recommended Cleaning Process
1. Put on clean disposable gloves prior to cleaning and disinfection.
2. Pull controls back to the fully retracted position to expose the full length of the control shafts.
3. Apply isopropyl alcohol to a clean microfiber towel. Do not spray any solution directly on the controls or any other surfaces or components in the aircraft.
!!! WARNING: DO NOT USE BLEACH WIPES ON ANY MCFARLANE CONTROL !!!
4. Gently and thoroughly wipe down every control knob surface and control shaft.
5. Let cleaning solution dry on these surfaces (contact time).
6. Use a clean and dry microfiber cloth to wipe away any solution residue left on knob and control shaft surface.
7. Remove all gloves, towels, and cleaning supplies from the work area in the aircraft.
Please contact McFarlane Sales directly at 866-920-2741 or 785-594-2741 or [email protected] if you have any additional questions regarding the disinfection of our controls.