Your Cart
Items
Free Shipping on orders over $500.00
Part # MC0716169-1
ASSEMBLY, Fuel Drain Valve
Get everything you need
Product Details
Specifications
- Approval
- FAA PMA
- Condition
- New
- Manufacturer
- McFarlane Aviation
- Dimensions
- L: 7 x W: 6 x H: 6 in
- Weight
- 0.0012 lbs
- Unit of Measure
- Each
- McFarlane Part Number
- MC0716169-1
Product Description
Cessna 185 Fuel Drain Valve Assembly
FAA-PMA Approved - Longer lasting, more compact design!
- Stronger, no-weld design
- Corrosion resistant aluminum alloy
- Sealed anodized finish for better corrosion resistance
- Save hundreds $$$
Our assembly includes the SA82 Fuel Drain Valve, which also includes an O-ring.
WARNING: Cancer and/or Reproductive Harm - California Proposition 65 Resources
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Quantity Per Aircraft | Location | Eligibility Chart |
|---|---|---|---|---|---|---|
| Cessna 185A | 185A | S/N 185-0414 – 185-0512 | 185-0512 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
| Cessna 185B | 185B | S/N 185-0513 – 185-0653 | 185-0653 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
| Cessna 185C | 185C | S/N 185-0654 – 185-0776 | 185-0776 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
| Cessna 185D | 185D | S/N 185-0777 – 185-0967 | 185-0967 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
| Cessna 185E | 185E | S/N 185-0968 – 185-1149 | 185-1149 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
| Cessna A185E | A185E | S/N 18501600 – 18501926 | 18501926 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
| Cessna A185E | A185E | S/N 18501927 – 18502090 | 18502090 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
| Cessna A185E | A185E | S/N 185-0968 – 185-1599 | 185-1599 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
| Cessna A185F | A185F | S/N 18502091 – 18502310 | 18502310 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
| Cessna A185F | A185F | S/N 18502311 – 18503683 | 18503683 | Quantity Per Aircraft 2 | Location Lower Fuselage | Eligibility Chart 1452 |
Cross Reference
Reference only: Please verify the product is eligible for your aircraft before adding to your cart.
-
0716110-1
-
0716169-1
FAQs
How do I maintain my fuel and oil drain valves?
Curtis Superior and SAF-AIR valves are designed for installation in a standard NPT port for NPT threaded valves or an AND-10050 style port for UNF threaded valves. Use a thread sealant or Teflon tape on pipe threaded valves. Never allow any thread sealant on the first thread . This will prevent contamination of the fuel system. Refer to aircraft manufacturer's torque specifications for the aircraft in which it is being used.
Replace the rubber seals as per the aircraft manufacturer’s recommendations or every ten years when no guidance is given. McFarlane stocks replacement seals and seal kits for both Curtis Superior and SAF-AIR valves. The new Curtis valves use a O-ring type seal instead of the flat seal that was previously used.
SAF-AIR valves are designed to be disassembled and the O-rings replaced. Over time, if the valve should start to leak, check to make sure the drain valve is tight. If drain valve is found to be tight, then check the O-rings. All O-rings used are buna "n", MS29513 Style, MIL-P-5315. SAF-AIR O-ring seal kits are available for most of their valves. Add a "K" or "-K" suffix to the valve part number.
Never have a hose attached in flight to the oil drain valve. Engine vibration and the additional attached mass can cause premature seal and valve wear which could result in valve failure and a loss of engine oil.
