I purchased a laser engraved knob and the thickness of the marking is very shallow. What kind of wear resistance can I expect?

The laser marking does not harm the hard durable anodize coating on the aluminum knob. The CO2 laser process only bleaches the color from the anodizing leaving a silver white color that contrasts with the surrounding dyed anodize. The durability of the laser marked area is not affected by the laser. Our tests have shown that the laser process actually improves the corrosion resistance of the anodize layer. The CO2 laser engraves aluminum knobs by vaporizing the surface leaving a deep durable groove. This groove is then filled with a special paint for contrast. The result is a durable long lasting mark.

Why is my new engine control too long/short?

There are several things that could be different such as engine/aircraft modifications, rigging/clocking of control arm or adjustment of rod end will be needed, placement of clamps or brackets may be different, or a previous installation change such as routing from original.

What is the minimum bend radius for my engine control?

McFarlane's Storage and Packaging Specification requires a specific packaging minimum radius based on the length of the control, type of wire used, and the configuration of the control end(s). Please contact us to determine the exact requirements for your specific control.

How do I trim my engine control to length?

Please reference the Installation Instructions included with your new control.

How do I clean and sanitize a McFarlane Push-Pull Control?

We make the following cleaning and sanitizing recommendations to be completed between flights: Recommended Cleaning Process 1. Put on clean disposable gloves prior to cleaning and disinfection. 2. Pull controls back to the fully retracted position to expose the full length of the control shafts. 3. Apply isopropyl alcohol to a clean microfiber towel. Do not spray any solution directly on the controls or any other surfaces or components in the aircraft. !!! WARNING: DO NOT USE BLEACH WIPES ON ANY MCFARLANE CONTROL !!! 4. Gently and thoroughly wipe down every control knob surface and control shaft. 5. Let cleaning solution dry on these surfaces (contact time). 6. Use a clean and dry microfiber cloth to wipe away any solution residue left on knob and control shaft surface. 7. Remove all gloves, towels, and cleaning supplies from the work area in the aircraft. Please contact McFarlane Sales directly at 866-920-2741 or 785-594-2741 or sales@mcfarlaneaviation.com if you have any additional questions regarding the disinfection of our controls.

Your Cart

Items

Total

Shipping and taxes calculated at checkout

Your Cart

0 Items

Total $0.00

Shipping and taxes calculated at checkout

View Full Cart Checkout

Home / Shop Parts / MCGP1111-72.000

P/N: MCGP1111-72.000

Name: CONTROL, Prop, 6ft, Unthread, LongTravel
Brand: McFarlane Aviation
SKU: MCGP1111-72.000
Price: 202.93 USD
Availability: BackOrder

CONTROL, Prop, 6ft, Unthread, LongTravel

Jump to product details

Share this product:

Approval
Condition	New
Manufacturer	McFarlane Aviation
Dimensions	L: 20 x W: 2 x H: 3 in
Weight	1.2 lbs
Unit of Measure	Each
Retail Price	$253.66
Your Price	$202.93
Stock Status	Pre-Order Notify me when it's back in stock Email *

Documents

FAQs

Related Items

Part #	Description	Retail Price	Your Price
MCGM1111-72.000	CONTROL, Mixture, 6ft, Unthread, LongTr	$253.66	$202.93
MCGP1111-48.000	CONTROL, Prop, 4ft, Unthread, LongTravel	$232.49	$185.99
MCGP1111-60.000	CONTROL, Prop, 5ft, Unthread, LongTravel	$244.91	$195.93
MCGT1111-72.000	CONTROL, Throttle, 6ft, Unthread, LongT	$291.81	$233.45

Frequently Asked Questions

Related Categories

Product Details

Propeller Control Vernier 72 Inch Noncertified

Universal Propeller Control, 6 Ft, Long Travel 3-3/8", Unthreaded, 3/4-16 Panel Nut

Noncertified propeller control with 72-inch length and 3.375 inch travel. Built with EC17 inner cable, unthreaded conduit terminal, and 3/4-16 panel mount thread.

Overall length: 72"
Travel length: long 3-3/8"
Conduit terminal: unthreaded
Panel nut thread size: 3/4 x 16 x 1"
Knob type: vernier
Knob color: blue

Benefits: