Your Cart
Items
Free Shipping on orders over $500.00
Part # MCGT1112-72.000
CONTROL, Throttle, 6ft, Unthread, LongT
Get everything you need
Product Details
Specifications
- Approval
- Condition
- New
- Manufacturer
- McFarlane Aviation
- Dimensions
- L: 20 x W: 2 x H: 3 in
- Weight
- 1.2 lbs
- Unit of Measure
- Each
- McFarlane Part Number
- MCGT1112-72.000
Product Description
Throttle Control Friction Lock 72 Inch Noncertified
Universal Throttle Control, 6 Ft, Long Travel 3-3/8", Unthreaded, 3/4-16 Panel Nut
Noncertified throttle control with 72-inch length and 3.375 inch travel. Built with EC17 inner cable, unthreaded conduit terminal, and 3/4-16 panel mount thread.
Overall length: 72"
Travel length: long 3-3/8"
Conduit terminal: unthreaded
Panel nut thread size: 3/4 x 16 x 1"
Knob type: friction lock
Knob color: black
Benefits:
- Noncertified control for experimental and homebuilt aircraft
- Standard configurations available: 48 inch, 60 inch, and 72 inch lengths
- Stocked assemblies reduce lead time compared to custom controls
- Built to the same standards as McFarlane certified controls
- High quality materials and tight tolerances
- Drastically outlasts typical noncertified control options
- Standard configurations fit most common installations
Note: Verify length, mounting, and thread compatibility before installation
WARNING: Cancer and/or Reproductive Harm - California Proposition 65 Resources
FAQs
My Vernier-Assist Throttle control came apart during installation or maintenance. Can it be put back together?
Yes, this is common and can put back together, provided no components are missing.
Why is my new engine control too long/short?
What is the minimum bend radius for my engine control?
McFarlane's Storage and Packaging Specification requires a specific packaging minimum radius based on the length of the control, type of wire used, and the configuration of the control end(s). Please contact us to determine the exact requirements for your specific control.
I purchased a laser engraved knob and the thickness of the marking is very shallow. What kind of wear resistance can I expect?
The laser marking does not harm the hard durable anodize coating on the aluminum knob. The CO2 laser process only bleaches the color from the anodizing leaving a silver white color that contrasts with the surrounding dyed anodize. The durability of the laser marked area is not affected by the laser. Our tests have shown that the laser process actually improves the corrosion resistance of the anodize layer. The CO2 laser engraves aluminum knobs by vaporizing the surface leaving a deep durable groove. This groove is then filled with a special paint for contrast. The result is a durable long lasting mark.
How do I clean and sanitize a McFarlane Push-Pull Control?
We make the following cleaning and sanitizing recommendations to be completed between flights:
Recommended Cleaning Process
1. Put on clean disposable gloves prior to cleaning and disinfection.
2. Pull controls back to the fully retracted position to expose the full length of the control shafts.
3. Apply isopropyl alcohol to a clean microfiber towel. Do not spray any solution directly on the controls or any other surfaces or components in the aircraft.
!!! WARNING: DO NOT USE BLEACH WIPES ON ANY MCFARLANE CONTROL !!!
4. Gently and thoroughly wipe down every control knob surface and control shaft.
5. Let cleaning solution dry on these surfaces (contact time).
6. Use a clean and dry microfiber cloth to wipe away any solution residue left on knob and control shaft surface.
7. Remove all gloves, towels, and cleaning supplies from the work area in the aircraft.
Please contact McFarlane Sales directly at 866-920-2741 or 785-594-2741 or [email protected] if you have any additional questions regarding the disinfection of our controls.
