MT Composite Propellers in Stock Now!

MT composite propellers are tough, light-weight, and vibration-free. In addition, the MT composite design eliminates the risk of corrosion and are owner field repairable resulting life unlimited blades. The schimitar blade design improves the take-off, climb, cruise, and landing performance of your aircraft while better engine cooling, lower CHTs, and reduced oil temperatures reduce fuel burn resulting in lower operating costs. With an MT Propeller you will always enjoy superior safety, performance, durability, and comfort.

• Smooth, vibration-free operation
• Tough Nickle-Cobalt leading edge for superior durability and erosion protection
• Enhanced climb performance
• Enhanced cruise performance on turbo equipped models
• Aerodynamic braking action
• Controlled descents and shorter rollout distance
• 26 pounds lighter than the three blade Hartzell
• Unlimited blade life, lower cost overhaul and no AD’s
• More ground clearance resulting in less FODs
• Significant noise reduction - inside and out
• Hot Prop and FIKI compatible Fluid Deice available
• Data Sheet

For ordering questions, details, and pricing confirmation contact our Propeller Specialists John or Larry at 866-717-1117.

To view additional STCs for Mooney and other aircraft go to Propellers or visit www.Flight-Resource.com.

Precision control with our roller action vernier 

Providing smooth jam-proof coarse and fine adjustments

• Jam-proof safety
• Precision power adjustments
• Smooth friction control
• Light and compact
• Standard vernier action, without the button!

*Microswitch Dust Boot and ICA included with microswitch cutout controls. Our boot keeps foreign objects out of the control and prevents contamination lock-up.

Catalog information

For ordering information go to Vernier-Assist Throttle Controls. 

Ram-Air Controls for Mooney Aircraft

FAA-PMA Approved Controls!

• High temperature Teflon© lined conduit
• Push-pull design
• Direct cable connection between control knob and ram air flaps

*Microswitch Dust Boot and ICA included with microswitch cutout controls. Our boot keeps foreign objects out of the control and prevents contamination lock-up. 

Catalog information

For ordering information go to Push-Pull Controls.

McFarlane Push-Pull Control Wrench Set

Install and remove push-pull control nuts behind the panel

• Slot provides clearance for conduit
• Wrench anywhere on the external hex
• 5.5" length provides clearance
• Lightweight aluminum is easy to handle when using overhead
• Works with all controls - six nut sizes: 1/2", 9/16", 11/16", 3/4", 7/8", and 1"
• Many other uses (brake/fuel/vent/hydraulic lines, etc.)
• Includes case
• Product Demonstration Video

For ordering information go to TOOL132.