Free Shipping on orders over $500.00
Part # 01-0771434B12
The 71434, 71440, and 71450 Series LED (Light Emitting Diode) instrument post light assemblies are designed to illuminate the instrument panel and function as instrument mounting bolts. They are a high quality, long lasting modern alternatives to standard incandescent post lights.
Tech Specifications:
Benefits of upgrading to LED technology include:
Model 71434 is identical to the 71450 without the connector nut. Both series are available in black or grey. The 14V version is available with White LED. The 28V version is available with White or Red LED. Made to replace existing A350 and A350CN assemblies.
Model 71440 has a #10-32 mounting thread. 28V version available with White or Red LED. Available in black. Made to replace Model 70348.
| Voltage | Length and Color | Part Number |
|---|---|---|
14 |
Long White |
|
14 |
Short White |
|
28 |
Short Red |
|
28 |
Long Red |
|
28 |
Short White |
|
14 |
Long White |
|
14 |
Short White |
|
28 |
Long Red |
|
28 |
Long White |
|
28 |
Long Red or White |
|
28 |
Long Red or White |
|
28 |
NVIS Green |
WARNING: Cancer and/or Reproductive Harm - California Proposition 65 Resources
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light and a strobe that covers 180 degrees from each wing tip.
The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the SunSpot 36 and 46?
The SunSpot 36LX landing and taxi lights and SunSpot 46LX can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers.
The SunSpot 36HX landing and taxi lights and SunSpot 46HX can be installed with the pulse function enabled in any model listed on the AML under STC, or in other aircraft models with a 337 that uses the AML STC as a basis for approval.
What are the installation requirements for the TSO lights?
If the lights are mounted to an existing mounting location with no structural modifications and existing wiring can be re-used, the lights can be installed with a log book entry.
If there are modifications to the wiring, a 337 should be submitted for approval for the installation.
If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What is the recommended wire for the Pulsar and SunTail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire.