Your Cart
Items
Free Shipping on orders over $500.00
Part # 01-2240-4541
LIGHT, Landing, Sunspot 56-4000, 28V
Product Details
Specifications
- Approval
- Condition
- New
- Manufacturer
- AeroLEDs
- Dimensions
- L: 8 x W: 8 x H: 3 in
- Weight
- 2 lbs
- Unit of Measure
- Each
- McFarlane Part Number
- 01-2240-4541
Product Description
AeroLEDs Sunspot 56-4000 LED Landing Light
Experimental Landing Light SunSpot 56 Series
Designed for efficiency, the SunSpot 56 series consumes less power, delivers more lumens, and is vibration resistant. Installation is seamless with the standard PAR56 mounts and existing electrical connections.
Produces superior illumination with enhanced ground visibility and air recognition from up to 30 miles away. The wider beam and aviation white color temperature provides exceptional color rendering, ensuring vivid, true-to-life illumination.
-H Model Features:
- Built-in pulse (wig-wag) mode for enhanced recognition, aiding in collision avoidance and reducing bird strikes
- Self-contained pulse controller reduces electrical load by 50% in multi-light installations
- Optional synchronization for advanced operational capabilities
Specifications:
- Power Consumption: 175 watts max
- Color Temperature: Aviation white for exceptional rendering
- Lifespan: 30,000+ hours MTBF
- Lens: UV-hard coated polycarbonate
- Construction: Aluminum with black powder-coated heat sink
- Mounting: Standard PAR56 compatibility
- Thermal Protection: Built-in for durability
- Max Current: 10.2A@14VDC, 6.3A@28VDC
- Weight: 1.8 lbs
- Length: 6.9" Width: 6.9" Depth: 1.9"
- Click here to view the data sheet
| Part Number | Voltage | Candela | Beam Profile | Wig-wag |
|---|---|---|---|---|
14V |
180,000 |
20º x 20º |
No |
|
28V |
180,000 |
20º x 20º |
No |
|
14V |
250,000 |
20º x 20º |
Yes |
|
28V |
250,000 |
20º x 20º |
Yes |
WARNING: Cancer and/or Reproductive Harm - California Proposition 65 Resources
FAQs
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light and a strobe that covers 180 degrees from each wing tip.
The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the SunSpot 36 and 46?
The SunSpot 36LX landing and taxi lights and SunSpot 46LX can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers.
The SunSpot 36HX landing and taxi lights and SunSpot 46HX can be installed with the pulse function enabled in any model listed on the AML under STC, or in other aircraft models with a 337 that uses the AML STC as a basis for approval.
What are the installation requirements for the TSO lights?
If the lights are mounted to an existing mounting location with no structural modifications and existing wiring can be re-used, the lights can be installed with a log book entry.
If there are modifications to the wiring, a 337 should be submitted for approval for the installation.
If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What is the recommended wire for the Pulsar and SunTail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire.
