Your Cart
Items
Free Shipping on orders over $500.00
Part # 6533
DRILL BIT, #5 HSS Jobber
Product Details
Specifications
- Approval
- Condition
- New
- Manufacturer
- Tools, Non-McFarlane
- Dimensions
- N/A
- Weight
- 0.03 lbs
- Unit of Measure
- Each
- McFarlane Part Number
- 6533
Product Description
Also available as part of the convenient Universal Joint Kits for Piper Aircraft which help comply with AD 2010-15-10 and Piper Service Bulletin 1197D.
- High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.
- Oxide prevents chip building, galling and welding on the workpiece. It is commonly used on low carbons, stainless steel and ferrous metals.
- Spiral flutes are constructed with a higher flute angle to remove chips more easily.
| Product | |
|---|---|
| Drill Bit Size | #5 Wire (0.2055") |
| Drill Point Angle | 135 |
| Drill Bit Material | High Speed Steel |
| Drill Bit Finish/Coating | Oxide |
| Flute Type | Spiral |
| Cutting Direction | Right Hand |
| Shank Type | Straight |
| Coolant Through | NonCoolant Through |
| Flute Length | 2.500" |
| Overall Length | 3.750" |
| Point Type | Split Point |
| Shank Diameter | 0.2055" |
| Spiral Type | Regular Spiral |
| Web Configuration | Tapered |
| Web Thinning | Web Thinned |
| Drill Bit Grade | Heavy Duty |
WARNING: Cancer and/or Reproductive Harm - California Proposition 65 Resources
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Eligibility Chart |
|---|---|---|---|---|
| Piper Many | Many | S/N 0 – ZZZZZZZZZZZZZZZ | ZZZZZZZZZZZZZZZ | Eligibility Chart |
Cross Reference
Reference only: Please verify this product is appropriate for your use case before adding to your cart.
-
01131051
FAQs
How do I know if my universal joint needs to be replaced?
A universal joint attaches to each control yoke shaft behind the instrument panel. Universal joints are very precision. Replacement of the universal joint is required if any free motion or rust around the joint pivots is detected or if the joint fails inspection required by the Piper AD 2010-15-10.
