P/N: 9341-R7090

Rochester Fuel Sender

Designed for top mounting in unpressurized aluminum, stainless steel, or plastic fuel tanks.
Includes special features and protections from corrosion problems internal and external to the fuel tanks!

The fuel sender is equipped with a thick film resistance card with a range of 0 to 90 ohms.

The recommended gasket for use under the head is made of nitrile rubber and must be ordered separately. (0015-00716, 5 bolt SAE nitrile gasket)

General Specifications:

• Mounting: Recommended for top mounting only
• Accuracy: Resistance accuracy at empty +0%, -3%; at full +3%, -0% of full scale. System accuracy depends upon proper fitting of sender to tank, tank shape and indicator calibration. This sender is not to be used for filling.
• Temperature: -40°F to 158°F, -40 to 70C
• Vibration: Qualified at 2g, 40 HZ
• Power: 0.5 Watts maximum
• Leak Test: Passes 16 PSIG [1,1 Bar] test

Standard configuration, with the lead hole at 12:00, has the float arm swinging at 3:00.

The float arm on this sender is 24" [609mm] long measured from the pivot point allowing it to be cut to an appropriate length to gauge any tank depth from 6" [152mm] to 25" [635mm]. The float and the washers are furnished unassembled to the float arm. The cutting and crimping process is to be done prior to the float assembly.