Your Cart
Items
Free Shipping on orders over $500.00
Part # SF3000-A
PROP PAINT, GLOSS WHITE, AEROSOL
Product Details
Specifications
- Approval
- Condition
- New
- Manufacturer
- APS
- Dimensions
- L: 3 x W: 3 x H: 8 in
- Weight
- 1 lbs
- Unit of Measure
- Each
- McFarlane Part Number
- SF3000-A
Product Description
Note: Superflite prop paints are air dry aerosols. It is not recommended to use with Prop Guard. If you want to use Prop Guard, we recommend using a 2-part paint instead (with appropriate primer), or original manufacturer's paint to ensure proper adhesion.
Superflite Aerosol Propeller Paint
Tempo A152 & A150 Replacement, Epoxy Enamel Aerosol for OE Repair
Fast drying, high-quality interior/exterior grade epoxy enamel aerosols designed for OE repair that will adhere to most metal substrates, some plastics, and previously painted surfaces.
- High-quality interior/exterior grade epoxy enamel, designed for OE repair
- Adheres to most metal substrates, some plastics, and previously painted surfaces
- Excellent exterior color and glass retention
- Compliant with EPA and CA regulations, meets the MIR requirement for aerosol formulations
- Air dry at low temperature to cure
- For use on bare metal or painted surfaces
- Application temperature: 60°F to 85°F, do not apply below 50°F
- Available in Gloss White (SF3000-A) or Flat Black (SF3100-A)
See SF3000 Series Propeller Paint Technical Sheet for more information.
WARNING: Cancer and/or Reproductive Harm - California Proposition 65 Resources
Cross Reference
Reference only: Please verify this product is appropriate for your use case before adding to your cart.
-
A152
FAQs
What surfaces will SF3000-A/SF3100-A adhere to?
Most metal substrates, some plastics, and previously painted surfaces.
Is Superflite prop paint compliant with current emissions regulations?
Yes, it's compliant with EPA and CA regulations and meets the MIR requirement for aerosol formulations
Does prop paint need to be air-dried or heat cured?
Either. It air dries or can be low-temperature cured. Recoat window is before 15 minutes or after 48 hours; dry-through is 24 hours.
Is there a minimum application temperature for prop paint?
Yes, do not apply below 50°F. Recommended application range is 60°F to 85°F.
What's the Tempo equivalent for SF3000-A and SF3100-A?
SF3000-A gloss white replaces Tempo A152; SF3100-A flat black replaces Tempo A150.
Are these products sold individually, or only in kits?
Individually. There's no minimum quantity required for ordering.
Can I use these aerosols for a full repaint, or just touch-up?
They're formulated and packaged for touch-up and small-area work. For a full repaint, a professional shop applying larger-format product is the better fit.
What should I do before applying any of these products?
Wash the surface with mild detergent, rinse, dry, then sand and featheredge where needed. Mask off or protect areas from overspray before spraying.
What safety equipment is required to apply these aerosols?
A properly fitted air-purifying respirator with organic cartridges and a particulate filter (or a fresh-air supplied respirator), eye protection, gloves, and protective clothing.
Can Prop Guard boots be used with Superflite prop paints?
Superflite prop paints are air dry aerosols. It is not recommended to use with Prop Guard. If you are wanting to use Prop Guard, we recommend using a 2-part paint with appropriate primer, or original manufacturer's paint to ensure proper adhesion.
