P/N: SF820-04

Epoxy Metal Primer Catalyst

Superflite Primer Catalyst for SF80 Epoxy Primer
The Superflite SF80 is a high build epoxy primer. It has been formulated for excellent adhesion and corrosion resistance when used on various types of substrates including properly prepared steel and aluminum.

Review the System 7 manual for a step-by-step guide on aircraft recovering. This manual includes handy tips, safety guidelines, troubleshooting, and more. View the digital download here or purchase the hardcopy (P/N D102-SYS7).

Mixing Ratio: Mix one part (gallon SF80-01 or quart SF80-04) epoxy primer base with one part SF820-04 epoxy primer catalyst. Reducer 25-50% with any of the 7800-series reducers.

Color: White

Clean up: Use lacquer thinner.

Application:

• Apply medium wet coats over substrate to desired film thickness
• Allow 15 – 45 minutes between coats, depending on catalyst used
• Sand after 24 hours when using SF820
• Clean gun after spraying is completed

Safety: Refer to Material Safety Data Sheet (MSDS) for complete safety instructions.