McFarlane Aviation Products - 01-1096

Part Number: 01-1096

TWIST MOUNT KIT, SunBeacon II
Qty

Free Shipping

Product Details

Twist Mount Kit

The SunBeacon II LED Navigation Light Twist Mount Kit provides easy installation and removal of the SunBeacon II on nearly every aircraft.

 

 

Technical Specifications: 

  • Inner Diameter: 0.91″
  • Outer Diamerter: 2.5″
  • Height: 0.08″ 

 

Inlcudes 6-32 100 Countersink Screws

 

 

  

SunBeacon II™ 

SunBeacon II™ is a high performance aircraft beacon light that provides a 360-degree flash pattern around its vertical axis. This compact beacon light comes standard with a clear lens – available with either white or red LEDs. It is a direct replacement for standard rotating aircraft beacons and flashing beacons. This strobe light offers superior anti-collision benefits with more light output for less power. It requires zero maintenance and has an extremely low profile for reduced drag in comparison to other aircraft beacon lights. Red TSO C96a Class I & III, White TSO C96a Class II.

 

 

Technical Specifications: 

  • 12V and 24V
  • No external power supply needed
  • Low power consumption
  • Strobe synchronization available
  • Easy installation

 

 

 

 


Learn more about AeroLEDs.

 

AeroLEDs offer high efficiency, direct replacement LED lighting for hundreds of aircraft. AeroLEDs are light weight, shock and vibration resistant, and have low drag. LED lighting easily lasts over 50,000 hours of continuous operation with no reduction by on/off cycles, with up to 80% reduced power consumption. The built-in Pulse Mode and synchronization blink the light on and off at a 1Hz rate when power is applied to the Pulse Mode power wire. Higher color temperature provides superior visibility and clarity.   

 

 

  

 

Increased Safety

AeroLEDs lights allow you to comply with the latest FAA recommendations (Operation Lights On) regarding extended use of taxi, landing and anti-collision lights without fear of reduced light performance or life. They all feature optimized light color (6500k sunlight equivalent) for proven superior air-to-air recognition. The landing lights also feature a pulsed recognition light mode. 

 

Reduced Power Consumption

High efficiency LED lights use less than 1/3 the power of halogen bulbs. They significantly reduce the load on the electrical system and they will not dim due to low voltage typical of low RPM final approaches when you need them most!

 

Longer Life - Zero Maintenance

All AeroLEDs products are designed to be a "lifetime buy." They last over 50,000 hours when properly installed and do not degrade with on/off cycles. They are extremely rugged and hardened against all kinds of electrical damage, shock and vibration. 

 

Pulse Recognition Mode

AeroLEDs lights with pulse mode (or wig-wag mode) greatly improve safety by alternately blinking the left then right light once per second. This dramatically increases your aircraft visibility to prevent both air and ground collisions. At least one 36HX or 46HX series light must be installed to enable pulse mode. 

 

Learn more about AeroLEDs.

Related Categories

Eligible Aircraft

Make Series Model Beginning S/N Ending S/N Eligibility Chart
Many Many Many 0 ZZZZZZZZZZZZZZZ 7215

Related Documents

Eligibility Charts

Eligibility for AeroLEDs

Related Product Catalog Pages

Lighting

Frequently Asked Questions

Question
What is the difference between the Pulsar NS and the Pulsar NSP?
What are the installation requirements for the SunSpot 36 and 46?
What are the installation requirements for the TSO lights?
What is the recommended wire for the Pulsar and SunTail lights?
warningWARNING: Cancer and/or Reproductive Harm - www.P65warnings.ca.gov