Part Number: PG-KT-R12

Qty
KIT, Repair, PROP GUARD, 12""

Product Details

Repair kit includes:

  • 12 inch length of PROP GUARD boot material
  • Adhesion accelerator
  • Lint-free cotton cloth
  • Spreader
  • Complete installation instructions

 

PROP GUARD Anti-Abrasion Boot 

McFarlane now owns the STC and has FAA-PMA approval for this great product that has saved aircraft owners countless dollars in propeller maintenance.

 

Anti-abrasion boot for your metal propeller
It is more economical to protect your propeller blades with PROP GUARD than to continually file, dress, paint and balance your blades until they have to be replaced. Water, sand, rock, and airborne abrasives are constantly eroding your propeller. As the name suggests, this product can eliminate this destructive process. Virtually all propeller blade failures start as leading edge nicks.

 

  • PROP GUARD is a 0.014" thick clear anti-abrasion boot that is bonded to the leading edge of the propeller
  • PROP GUARD is made from a special high strength heat processed polymer engineered for centrifugal loads. It is NOT just a piece of tape!
  • Easy to install (approximately 20 minutes installation time)
  • No performance loss
  • Fully tested
  • Repairable
  • FAA-PMA/STC approved (minor alteration, no form 337 required)

 

Each kit contains: PROP GUARD boot for a two or three bladed propeller, adhesion accelerator, placard, lint-free cotton cloth, complete installation instructions and a copy of the STC. Please see Part Number FP1001 for two blades or Part Number CS1002 for three blades.

 

Convenient Repair Kits 

Repair kits to allow repair of existing PROP GUARD installations. Please see P/N PG-KT-R12 for 12 inches of material or P/N PG-KT-R24 for 24 inches of material.

 

PROP GUARD Installation Tool 

P/N TOOL125 is a rubber coated roller that makes working air bubbles out during installation easier than using the spatula included with the PROP GUARD kits. Saves time and makes installation easier!

 

Installation Tutorial Video

 

Check the static balance of your propeller quickly and accurately with McFarlane's Propeller Balancing Bushing Kits

 

 

warningWARNING: Cancer and/or Reproductive Harm - www.P65warnings.ca.gov

Kit Components

Part Number PG-KT-R12 contains the following:

Component Description Quantity U/M
32965-1 ADHESION ACCELERATOR, 4 mL 1.000 EACH

Eligible Aircraft

Make Series Model Beginning S/N Ending S/N Quantity Per Aircraft Location Comment Eligibility Chart
Many Many Many 0 ZZZZZZZZZZZZZZZ See approved model list for eligible propellers.

Frequently Asked Questions

Question
How does PROP GUARD work to stop rock and abrasion damage?
I noticed an expiration date on the box of PROP GUARD, what components of the kit expire?
Do I have to fill out a form 337?
Can I install PROP GUARD on a Composite prop if it is not listed on the approved model list?
Can PROP GUARD be installed on polished propellers?
How do I remove PROP GUARD?
What causes the paint to come off the prop after PROP GUARD installation?
Can I use spray paint to paint my prop?
Can PROP GUARD be installed on a wooden prop?
Can PROP GUARD be installed on a seaplane application to stop water erosion?
Will PROP GUARD protect my propeller from damage caused by a big rock?
How do I prepare my bare metal areas on my propeller for new paint?
Will PROP GUARD degrade propeller performance?
Can I fly in the rain with PROP GUARD installed?
How long does it take to put on PROP GUARD?
Why is PROP GUARD clear?
Why is PROP GUARD glossy instead of flat? A satin or flat finish would match the flat black on the back of the propeller.
Is PROP GUARD the same as the abrasion tape that I see advertised?

Related Videos

PROP GUARD Installation Tutorial