McFarlane Aviation Products

Part Number: TOOL132

WRENCH, Set, Push Pull Control

Eligibility Notice

Please verify that this product is eligible for your aircraft before adding it to your cart.

Click here to view product eligibility.

Share This Page

Product Details

Push-Pull Control Wrench Set

Install and remove push-pull control nuts behind the panel

Slot provides clearance for conduit
Wrench anywhere on the external hex
5.5" length provides clearance
Lightweight aluminum is easy to handle when using overhead
Works with all controls - six nut sizes: 1/2", 9/16", 11/16", 3/4", 7/8", and 1"
Many other uses (brake/fuel/vent/hydraulic lines, etc.)
Includes case
Product Demonstration Video

Wrenches also sold separately!

Part Number	Description
TOOL132	Contains one of each Wrench
TOOL132-8/9	1/2" and 9/16" Wrench
TOOL132-11/12	11/16" and 3/4" Wrench
TOOL132-14/16	7/8" and 1" Wrench

WARNING: Cancer and/or Reproductive Harm - www.P65warnings.ca.gov

Related Categories

Eligible Aircraft

Make	Series	Model	Beginning S/N	Ending S/N	Quantity Per Aircraft	Location	Comment	Eligibility Chart
Cessna	Many	Many	0	ZZZZZZZZZZZZZZZ

Related Product Catalog Pages

Control Eligibility and Catalog Information

Frequently Asked Questions

Question
I purchased a laser engraved knob and the thickness of the marking is very shallow. What kind of wear resistance can I expect? The laser marking does not harm the hard durable anodize coating on the aluminum knob. The CO2 laser process only bleaches the color from the anodizing leaving a silver white color that contrasts with the surrounding dyed anodize. The durability of the laser marked area is not affected by the laser. Our tests have shown that the laser process actually improves the corrosion resistance of the anodize layer. The CO2 laser engraves the hard plastic knobs by vaporizing the surface leaving a deep durable groove. This groove is then filled with a special paint for contrast. The result is a durable long lasting mark.
Why is my new engine control too long/short? There are several things that could be different such as engine/aircraft modifications, rigging/clocking of control arm or adjustment of rod end will be needed, placement of clamps or brackets may be different, or a previous installation change such as routing from original.
What is the minimum bend radius for my engine control? McFarlane's Storage and Packaging Specification requires a specific packaging minimum radius based on the length of the control, type of wire used, and the configuration of the control end(s). Please contact us to determine the exact requirements for your specific control.
How do I trim my engine control to length? Please reference the Installation Instructions included with your new control.
How do I clean and sanitize a McFarlane Push-Pull Control? We make the following cleaning and sanitizing recommendations to be completed between flights: Recommended Cleaning Process 1. Put on clean disposable gloves prior to cleaning and disinfection. 2. Pull controls back to the fully retracted position to expose the full length of the control shafts. 3. Apply isopropyl alcohol to a clean microfiber towel. Do not spray any solution directly on the controls or any other surfaces or components in the aircraft. !!! WARNING: DO NOT USE BLEACH WIPES ON ANY MCFARLANE CONTROL !!! 4. Gently and thoroughly wipe down every control knob surface and control shaft. 5. Let cleaning solution dry on these surfaces (contact time). 6. Use a clean and dry microfiber cloth to wipe away any solution residue left on knob and control shaft surface. 7. Remove all gloves, towels, and cleaning supplies from the work area in the aircraft. Please contact McFarlane Sales directly at 866-920-2741 or 785-594-2741 or sales@mcfarlaneaviation.com if you have any additional questions regarding the disinfection of our controls.

Approval
Condition	New
Manufacturer	McFarlane Aviation, Inc.
Unit of Measure	EACH
Retail Price	$477.58
Your Price	$159.19
Stock Status	In Stock

Part Number: TOOL132

Eligibility Notice

Product Details

Related Categories

Eligible Aircraft

Related Documents

Product Flyer

Product Catalogs and Price Lists

McFarlane Newsletters

Maintenance and Product Guides

Installation, Use, and Maintenance Instructions

Related Product Catalog Pages

Frequently Asked Questions

Related Videos

Push-Pull Control Wrench Set TOOL132