Vacuum Pumps
Tempest Dry Air Vacuum Pumps
Tempest offers a complete line of new and overhauled FAA-PMA approved dry air pumps. 
- Monolithic construction
- Wear indicator port
- Revolutionary LRT oil drain
- Closed front end keeps oil from entering the pump
- Radius edges make installation easier
- Through bolts maintain constant body torque and alignment
- Installation gaskets are included with each vacuum pump
All new and overhauled Tempest dry air pumps come with patented WIP™ (Wear Indicator Port) that allows for internal observation of the pump’s vanes. The WIP™ helps determine if the pump should be replaced and avoid unscheduled maintenance due to a pump exceeding its life cycle. They also include finned stators for increased cooling and an “ultra-hard” finish on the internal wear surfaces of the stator for low friction and extended life.
New Tempest dry air pumps offer a closed coupling area and patented “LRT” diverter. These design features will help you detect and prevent pump contamination from external sources.
The 240 and 400 series dry air pumps are rugged, light-weight, and designed with today’s high-performance aircraft in mind. These pumps use a heat-treated, stainless-steel conical pressure plate spring and torsional dampening springs to provide a harmonics-free pressure plate control and smooth temperature compensation. The larger pumps also use hardened stainless-steel pressure plates that are precision ground and lapped to reduce internal leakage and wear.
For these reasons and more, Tempest is the preferred dry air pump of aviation maintenance technicians worldwide.
Always have the right tool for the job!
Vacuum Pump Wrenches
Finally a vacuum pump wrench that actually works and does not break!
A different wrench for the two sizes of pumps (one wrench can't do both pumps well)
P/N TOOL133 - 3.72" length, use for small pumps
P/N TOOL133-L - 4.83" length, use for large pumps
|
New Pumps Each pump is meticulously and professionally hand assembled to insure proper tolerances and clearances. This assures optimum performance. After assembly, each pump is functionally tested. After this initial testing, the pump is disassembled, inspected for any unusual wear or abnormalities, and reassembled for a second test run. This extensivetesting procedure assures that only first-class products leave the facility.
Overhauled Pumps When Tempest receives a core, it is disassembled and all carbon is discarded. Tempest never re-uses carbon. A new stator is used on all 200 series pumps. The larger 400 series pumps have the hard anodize stripped from the center stator and the stator is inspected for cracks. Then the I.D. is reconditioned. After the reconditioning process, each 400 series stator is meticulously inspected for proper dimensions. The stator then receives a new hard anodize coating. All re-used parts are inspected in the overhaul process to make sure that each part meets the FAA-PMA approved requirements process specification 203-6-1009. |
The following search filters are active
Tempest Dry Air Vacuum Pumps
Tempest offers a complete line of new and overhauled FAA-PMA approved dry air pumps.
- Monolithic construction
- Wear indicator port
- Revolutionary LRT oil drain
- Closed front end keeps oil from entering the pump
- Radius edges make installation easier
- Through bolts maintain constant body torque and alignment
- Installation gaskets are included with each vacuum pump
All new and overhauled Tempest dry air pumps come with patented WIP™ (Wear Indicator Port) that allows for internal observation of the pump’s vanes. The WIP™ helps determine if the pump should be replaced and avoid unscheduled maintenance due to a pump exceeding its life cycle. They also include finned stators for increased cooling and an “ultra-hard” finish on the internal wear surfaces of the stator for low friction and extended life.
New Tempest dry air pumps offer a closed coupling area and patented “LRT” diverter. These design features will help you detect and prevent pump contamination from external sources.
The 240 and 400 series dry air pumps are rugged, light-weight, and designed with today’s high-performance aircraft in mind. These pumps use a heat-treated, stainless-steel conical pressure plate spring and torsional dampening springs to provide a harmonics-free pressure plate control and smooth temperature compensation. The larger pumps also use hardened stainless-steel pressure plates that are precision ground and lapped to reduce internal leakage and wear.
For these reasons and more, Tempest is the preferred dry air pump of aviation maintenance technicians worldwide.
Always have the right tool for the job!
Vacuum Pump Wrenches
Finally a vacuum pump wrench that actually works and does not break!
A different wrench for the two sizes of pumps (one wrench can't do both pumps well)
P/N TOOL133 - 3.72" length, use for small pumps
P/N TOOL133-L - 4.83" length, use for large pumps
|
New Pumps Each pump is meticulously and professionally hand assembled to insure proper tolerances and clearances. This assures optimum performance. After assembly, each pump is functionally tested. After this initial testing, the pump is disassembled, inspected for any unusual wear or abnormalities, and reassembled for a second test run. This extensivetesting procedure assures that only first-class products leave the facility.
Overhauled Pumps When Tempest receives a core, it is disassembled and all carbon is discarded. Tempest never re-uses carbon. A new stator is used on all 200 series pumps. The larger 400 series pumps have the hard anodize stripped from the center stator and the stator is inspected for cracks. Then the I.D. is reconditioned. After the reconditioning process, each 400 series stator is meticulously inspected for proper dimensions. The stator then receives a new hard anodize coating. All re-used parts are inspected in the overhaul process to make sure that each part meets the FAA-PMA approved requirements process specification 203-6-1009. |
| Part Number | Description | U/M | Retail Price | Your Price | Stock | |
|
441CC-17OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1376.23 | $875.86 + $100.00 Core Charge |
|
|
|
441CC-OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1274.27 | $810.98 + $100.00 Core Charge |
|
|
|
442CW-4OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1274.29 | $810.99 + $100.00 Core Charge |
|
|
|
442CW-6OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1274.29 | $810.99 + $100.00 Core Charge |
|
|
|
442CW-8OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1274.27 | $810.98 + $100.00 Core Charge |
|
|
|
442CW-10OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1274.28 | $810.98 + $100.00 Core Charge |
|
|
|
442CW-12OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1474.76 | $938.57 + $100.00 Core Charge |
|
|
|
442CW-14OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1376.23 | $875.86 + $100.00 Core Charge |
|
|
|
442CW-20OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1274.28 | $810.98 + $100.00 Core Charge |
|
|
|
442CW-OH SERIES |
DRY AIR PUMP, Overhauled
Free Shipping |
Each | $1323.30 | $842.18 + $100.00 Core Charge |
|
|
|
AA4A2-1 |
DRY AIR PUMP, Electric Auxilary, 28VDC
Free Shipping |
Each | $3917.27 | $2493.05 |
|
|
|
AA4A3-1 |
DRY AIR PUMP, Electric Auxilary, 14VDC
Free Shipping |
Each | $4317.08 | $2747.50 |
|
|
AA243CC |
DRY AIR PUMP, With WIP, New
Free Shipping |
Each | $1621.09 | $1031.70 |
|
|
|
AA243CC-13 |
DRY AIR PUMP, With WIP, New
Free Shipping |
Each | $1456.51 | $926.96 |
|
|
|
AA243CC-15 |
DRY AIR PUMP, With WIP, New
Free Shipping |
Each | $1543.91 | $982.58 |
|
|
|
AA244CW |
DRY AIR PUMP, With WIP, New
Free Shipping |
Each | $1621.09 | $1031.70 |
|
|
|
AA244CW-4 |
DRY AIR PUMP, With WIP, New
Free Shipping |
Each | $1456.51 | $926.96 |
|
|
|
AA244CW-10 |
DRY AIR PUMP, With WIP, New
Free Shipping |
Each | $1456.51 | $926.96 |
|
|
|
AA441CC |
DRY AIR PUMP
Free Shipping |
Each | $2037.86 | $1296.94 |
|
|
|
AA441CC-3 |
DRY AIR PUMP
Free Shipping |
Each | $2037.85 | $1296.94 |
|