McFarlane Aviation Products

Part Number: 01-0771379-02

LIGHT, Position, LED, Red, 28V, Fwd, 7137902

Approval	FAA-TSO
Condition	New
Manufacturer	Whelen Aerospace Technologies
Unit of Measure	Each
Retail Price	$365.00
Your Price	$309.00
Stock Status	In Stock

Share This Page

Product Details

71379 Series Forward Navigation Lights

The 71379 series is an LED wing tip Forward Navigation Light designed to be located under a fairing but is suitable for external mounting as well.

Product ships with a 6" flying lead.

Technical Specifications:

Current Draw: 0.25 amps at 28VDC
Weight: 0.23 pounds (104gm)

Voltage	Recognition Type	Color	Part Number
28	Navigation	Green	01-0771379-01
28	Navigation	Red	01-0771379-02
14	Navigation	Green	01-0771379-11
14	Navigation	Red	01-0771379-12

Whelen Aerospace Technologies is the global leader in high-end lighting products for the aerospace industry. Experienced staff designs, engineers, and manufactures high-quality products that provide safety, visibility, and recognition for aircraft across all platforms. Design engineers work closely with OEM and service provider networks to design high-performance products that enhance the pilot experience, as well as provide safety of flight.

As an FAA-approved production holder, Whelen Aerospace Technologies owns hundreds of STCs for aircraft landing, taxi, anti-collision and position lights. In-house composite shop produces a wide variety of STC and PMA approved speed modifications for a number of general aviation aircraft.

Related Categories

Lighting >> Navigation Lights >> 24 Volt System >> Red
Lighting >> Position Lights >> 24 Volt System

Eligible Aircraft

Make	Series	Model	Beginning S/N	Ending S/N	Eligibility Chart
Many	Many	Many	0	ZZZZZZZZZZZZZZZ	1546

Eligibility Chart 1546 Notes:

Aircraft as marked require specific attention to proper balancing of rudder. Refer to the Service Manual for balancing instructions.
Installations on these aircraft require prior or concurrent installation of STC SA4-977.
Installation is limited to the previously approved landing/taxi light lamp size, voltage and location(s).
AD 96-10-01 R1or later revision must be complied with prior to installing the Parmetheus Plus LED light assemblies.
No approved installation located on the retracting portion of a landing gear.

Related Product Catalog Pages

Lighting

Frequently Asked Questions

Question
What is the difference between the Pulsar NS and the Pulsar NSP? The Pulsar NS has a forward red or green navigation light and a strobe that covers 180 degrees from each wing tip. The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the SunSpot 36 and 46? The SunSpot 36LX landing and taxi lights and SunSpot 46LX can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers. The SunSpot 36HX landing and taxi lights and SunSpot 46HX can be installed with the pulse function enabled in any model listed on the AML under STC, or in other aircraft models with a 337 that uses the AML STC as a basis for approval.
What are the installation requirements for the TSO lights? If the lights are mounted to an existing mounting location with no structural modifications and existing wiring can be re-used, the lights can be installed with a log book entry. If there are modifications to the wiring, a 337 should be submitted for approval for the installation. If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What is the recommended wire for the Pulsar and SunTail lights? We recommend 3 conductor 20 gauge shielded single bundle wire.

WARNING: Cancer and/or Reproductive Harm - www.P65warnings.ca.gov