Technical Specifications:
Note: No external power supply required. Strobe synchronization available.
SunTail™ Series
The SunTail is an exceptionally bright Anti-Collision Strobe and White Position tail light designed as a direct drop-in replacement for a legacy light, using the same mounting footprint. The SunTail does not require any external power supply, and can be synchronized to flash with AeroLEDs Pulsar wingtip lights.
Voltage
|
Recognition Type
|
Certified/Experimental
|
Part Number
|
12
|
Tail Position
|
Certified
|
|
12
|
Tail Position
|
Experimental
|
|
24
|
Tail Position
|
Certified
|
|
24
|
Tail Position
|
Experimental
|
Learn more about AeroLEDs.
AeroLEDs offer high efficiency, direct replacement LED lighting for hundreds of aircraft. AeroLEDs are light weight, shock and vibration resistant, and have low drag. LED lighting easily lasts over 50,000 hours of continuous operation with no reduction by on/off cycles, with up to 80% reduced power consumption. The built-in Pulse Mode and synchronization blink the light on and off at a 1Hz rate when power is applied to the Pulse Mode power wire. Higher color temperature provides superior visibility and clarity.
Increased Safety
AeroLEDs lights allow you to comply with the latest FAA recommendations (Operation Lights On) regarding extended use of taxi, landing and anti-collision lights without fear of reduced light performance or life. They all feature optimized light color (6500k sunlight equivalent) for proven superior air-to-air recognition. The landing lights also feature a pulsed recognition light mode.
Reduced Power Consumption
High efficiency LED lights use less than 1/3 the power of halogen bulbs. They significantly reduce the load on the electrical system and they will not dim due to low voltage typical of low RPM final approaches when you need them most!
Longer Life - Zero Maintenance
All AeroLEDs products are designed to be a "lifetime buy." They last over 50,000 hours when properly installed and do not degrade with on/off cycles. They are extremely rugged and hardened against all kinds of electrical damage, shock and vibration.
Pulse Recognition Mode
AeroLEDs lights with pulse mode (or wig-wag mode) greatly improve safety by alternately blinking the left then right light once per second. This dramatically increases your aircraft visibility to prevent both air and ground collisions. At least one 36HX or 46HX series light must be installed to enable pulse mode.
OEM Part Number | McFarlane Part Number | Comment |
11-1160 | 11-1260-12 |
Make | Series | Model | Beginning S/N | Ending S/N | Eligibility Chart |
Many | Many | Many | 0 | ZZZZZZZZZZZZZZZ | 7215 |
Technical Standard Order Authorization--Aircraft Position Lights |
Technical Standard Order Authorization-Anti-Collision Light Systems |
Eligibility for AeroLEDs |
11-1260-12 Datasheet |
Lighting |
Please verify product details for suitability for your application.