Your Cart
Items
Free Shipping on orders over $500.00
Part # MC0756041-1
GASKET, Fuel Strainer
Get everything you need
Product Details
Specifications
- Approval
- FAA PMA
- Condition
- New
- Manufacturer
- McFarlane Aviation
- Dimensions
- L: 3 x W: 2.88 x H: 0.13 in
- Weight
- 0.01 lbs
- Unit of Measure
- Each
- McFarlane Part Number
- MC0756041-1
Product Description
Save 33% off Cessna price!
The improved fuel-proof Viton foam will keep the gasket doing its job!
This gasket will not shrink and harden due to fuel exposure like the original.
| Maintenance Tip: Cessna maintenance manual requires replacement of this gasket every 100 hours. |
Maintenance Tip:
Cleaning the Fuel Screen - The fuel screen is removed by removing the standpipe. The rubber tipped plunger must be unseated before the standpipe is loosened. Failure to lift the plunger off of its standpipe seat can damage the plunger. Pull the strainer drain knob as if you were draining the fuel bowl. Block or clamp the knob in this position. Insert a smooth round tool such as a screwdriver or punch in the standpipe cross-hole and unscrew the standpipe.
WARNING: Cancer and/or Reproductive Harm - California Proposition 65 Resources
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Quantity Per Aircraft | Location | Eligibility Chart |
|---|---|---|---|---|---|---|
| Cessna 172R | 172R | S/N 17280001 – 17299999 | 17299999 | Quantity Per Aircraft 1 | Location FUEL STRAINER | Eligibility Chart 1603 |
| Cessna 172S | 172S | S/N 172S8001 – 172S99999 | 172S99999 | Quantity Per Aircraft 1 | Location FUEL STRAINER | Eligibility Chart 1603 |
| Cessna 182S | 182S | S/N 18280001 – 18280944 | 18280944 | Quantity Per Aircraft 1 | Location FUEL STRAINER | Eligibility Chart 1603 |
| Cessna 182T | 182T | S/N 18280945 – 182999999 | 182999999 | Quantity Per Aircraft 1 | Location FUEL STRAINER | Eligibility Chart 1603 |
| Cessna T182T | T182T | S/N T18208001 – T182999999 | T182999999 | Quantity Per Aircraft 1 | Location FUEL STRAINER | Eligibility Chart 1603 |
| Cessna 206H | 206H | S/N 20608001 – 206999999 | 206999999 | Quantity Per Aircraft 1 | Location FUEL STRAINER | Eligibility Chart 1603 |
| Cessna T206H | T206H | S/N T20608001 – T206999999 | T206999999 | Quantity Per Aircraft 1 | Location FUEL STRAINER | Eligibility Chart 1603 |
| Cessna TU206G | TU206G | S/N U20606847 – U20607020 | U20607020 | Quantity Per Aircraft 1 | Location FUEL STRAINER | Eligibility Chart 1603 |
| Cessna U206G | U206G | S/N U20606847 – U20607020 | U20607020 | Quantity Per Aircraft 1 | Location FUEL STRAINER | Eligibility Chart 1603 |
Cross Reference
Reference only: Please verify the product is eligible for your aircraft before adding to your cart.
-
0756041-1
FAQs
How do I keep contaminants out of my fuel system?
The fuel selector valve works in unscreened fuel. Contaminated fuel can cause selector valve seal damage. When fueling from possibly contaminated fuel sources McFarlane recommends the use of a fuel filter, such as Mr. Funnel or another filtering device, to reduce trash in the fuel system.
Do I need to remove the Cessna fuel strainer standpipe to clean the fuel screen?
Yes. The fuel screen is removed by removing the standpipe. The rubber tipped plunger must be unseated before the standpipe is loosened. Failure to lift the plunger off of its standpipe seat can damage the plunger. Pull the strainer drain knob as if you were draining the fuel bowl. Block or clamp the knob in this position. Insert a smooth round tool such as a screw driver or punch in the standpipe cross-hole and un-screw the standpipe.
Should I use a sealer or lubrication for my Viton gaskets?
The Viton gasket and screw seals do not require any sealer and must not have any lubricants. Do not over tighten the attachment screws as over tightening can extrude the gasket out from under the transmitter and tear the gasket in the screw holes. This will cause a leak. Tighten the screws evenly until you see the gasket just start to extrude a little. Any lubrication will aggravate the tearing of the gasket.
