Plastic/Fiberglass Interior/Exterior
Plastic and fiberglass interior and exterior parts from Texas Aeroplastics, Knots 2U, Stene Aviation, Aircraft Development, Premier Aerospace Services & Technology, and Vantage Plane Plastics offer high quality FAA-PMA replacement parts at affordable prices.
Texas Aeroplastics
Texas Aeroplastics replacement parts are made from top grade ABS plastic with an average service life of 15-20 years when properly fitted and professionally painted. ABS plastic parts are repairable and most have been trimmed for easy installation. All exterior ABS plastic parts are white. All interior parts are fire rated, top-grade Royalite with an ivory or off-white haircell finish.
Knots 2U
Knots 2U replacement parts are made from the highest quality hand laid fiberglass. This provides for superior strength, reduced weight, and long life. The latest technology resins are used to prevent warping and shrinkage that can happen with other fiberglass. Advanced tooling and pattern techniques assure a superior fit.
Stene Aviation
Stene Aviation fiberglass replacement parts are five times stronger than the original plastic parts offered by Cessna. They are exact replacements of the originals and come primed and ready for paint. The product line includes Cessna wing tips, strut cuffs, fin caps, rudder caps/bottoms, stabilizer tips, wheel pants and much more.
Aircraft Development
Aircraft Development replacement wing tips and landing gear fairings are made from an epoxy fiberglass construction and are six times stronger and twelve times stiffer than original plastic. They are weather and UV resistant, won't become brittle and are easily repairable.
Premier Aerospace Services and Technology, Inc.
Premier Aerospace Services and Technology, Inc. is a state of the art plastic components manufacturer providing high quality FAA-PMA replacement parts manufactured using PVC/Acrylic.
Vantage Plane Plastics
Vantage Plane Plastics is the world’s largest supplier of quality FAA-PMA interior plastic replacement parts for general aviation. They have an extensive range of thermoformed plastics for commercial aerospace, with over 4,000 FAA-PMA approved parts for most single engine planes, helicopters, and multi-engine executive aircraft.
The following search filters are active
Plastic and fiberglass interior and exterior parts from Texas Aeroplastics, Knots 2U, Stene Aviation, Aircraft Development, Premier Aerospace Services & Technology, and Vantage Plane Plastics offer high quality FAA-PMA replacement parts at affordable prices.
Texas Aeroplastics
Texas Aeroplastics replacement parts are made from top grade ABS plastic with an average service life of 15-20 years when properly fitted and professionally painted. ABS plastic parts are repairable and most have been trimmed for easy installation. All exterior ABS plastic parts are white. All interior parts are fire rated, top-grade Royalite with an ivory or off-white haircell finish.
Knots 2U
Knots 2U replacement parts are made from the highest quality hand laid fiberglass. This provides for superior strength, reduced weight, and long life. The latest technology resins are used to prevent warping and shrinkage that can happen with other fiberglass. Advanced tooling and pattern techniques assure a superior fit.
Stene Aviation
Stene Aviation fiberglass replacement parts are five times stronger than the original plastic parts offered by Cessna. They are exact replacements of the originals and come primed and ready for paint. The product line includes Cessna wing tips, strut cuffs, fin caps, rudder caps/bottoms, stabilizer tips, wheel pants and much more.
Aircraft Development
Aircraft Development replacement wing tips and landing gear fairings are made from an epoxy fiberglass construction and are six times stronger and twelve times stiffer than original plastic. They are weather and UV resistant, won't become brittle and are easily repairable.
Premier Aerospace Services and Technology, Inc.
Premier Aerospace Services and Technology, Inc. is a state of the art plastic components manufacturer providing high quality FAA-PMA replacement parts manufactured using PVC/Acrylic.
Vantage Plane Plastics
Vantage Plane Plastics is the world’s largest supplier of quality FAA-PMA interior plastic replacement parts for general aviation. They have an extensive range of thermoformed plastics for commercial aerospace, with over 4,000 FAA-PMA approved parts for most single engine planes, helicopters, and multi-engine executive aircraft.
| Part Number | Description | U/M | Retail Price | Your Price | Stock | |
|
20-01-80A | DOOR PANEL KIT, Universal Fit | EACH | $437.85 | $350.28 |
|
|
20-14 | TRAY, Shoulder Harness | EACH | $78.13 | $62.50 |
|
|
20-40N-80A | FAIRING, Nose Wheel | EACH | $724.50 | $579.60 |
|
|
20-51-80A | CONICAL WING TIP KIT | EACH | $872.44 | $697.95 |
|
|
20-51L-80A | TIP, Wing, Conical, LH | EACH | $436.23 | $348.98 |
|
|
20-51R-80A | TIP, Wing, Conical, RH | EACH | $436.23 | $348.98 |
|
|
20-52-80A | CONICAL WING TIP KIT | EACH | $872.44 | $697.95 |
|
|
|
20-52L-80A | TIP, Wing, LH | EACH | $436.23 | $348.98 |
|
|
|
20-52R-80A | TIP, Wing, RH | EACH | $436.23 | $348.98 |
|
|
26-02-80A | DOOR PANEL KIT | EACH | $466.91 | $373.53 |
|
|
26-03D-80A | DOOR PANEL KIT | EACH | $466.91 | $373.53 |
|
|
26-04-80A | STRUT FAIRING KIT | EACH | $387.73 | $310.18 |
|
|
26-05-80A | LANDING GEAR FAIRING KIT | EACH | $177.26 | $141.81 |
|
|
26-06-80A | LANDING GEAR FAIRING KIT | EACH | $256.48 | $205.18 |
|
|
26-06L | FAIRING, Main Landing Gear, LH | EACH | $128.24 | $102.59 |
|
|
26-06R | FAIRING, Main Landing Gear, RH | EACH | $128.24 | $102.59 |
|
|
26-07-80A | BRAKE COVER FAIRING KIT | EACH | $409.50 | $327.60 |
|
|
26-07-LBC | FAIRING, Brake Cover, LH | EACH | $204.75 | $163.80 |
|
|
26-07-RBC | FAIRING, Brake Cover, RH | EACH | $204.75 | $163.80 |
|
|
26-08 | TIP, Horiz. Stabilizer, LH/RH | EACH | $96.74 | $77.39 |
|