McFarlane Aviation Products FAA-PMA Replacement Aircraft Parts

Controls, Push Pull

Controls Banner

FAA-PMA Approved Controls

for Beechcraft, Cessna, Mooney, Piper, Experimental and More!

Manufactured by the most trusted name in the industry.

Alternate Air

High quality controls at an affordable price

McFarlane offers FAA-PMA approved throttle, propeller, mixture, cowl flap, carb heat, and cabin environment controls for many single engine Beechcraft, Cessna, Piper, Mooney, Grumman and Bellanca aircraft. We also have a wide variety of controls for use on non-certified aircraft.

Our engine and propeller controls incorporate a number of unique features that make McFarlane Controls the highest quality engine and propeller controls on the market. If you don't already have our engine controls in your aircraft, it's time to upgrade to the best!

To find the control for your aircraft, to go Controls, Push Pull.

Please view the Control Eligibility and Catalog Information to determine the correct part number for your specific aircraft.

Our Vernier-Assist Throttle Controls are now FAA-PMA approved!

Vernier and Friction Lock - The Best of Both

Vernier-Assist offers precision control without sacrificing safety.

McFarlane offers FAA-PMA approved throttle, propeller, mixture, cowl flap, carb heat, and cabin environment controls for many single engine Cessna, Piper, Grumman and Bellanca aircraft. We also have a wide variety of controls for use on non-certified aircraft.

Please view the Control Eligibility and Catalog Information to determine the correct part number for your specific aircraft.

Our solid metal construction and Teflon lined conduit provide precise positive control even after years of service in the harshest environments.

Pilot friendly knobs
Vibration dampening features
Lifetime lubrication
Consistent quality
Custom controls available

For more information, go to McFarlane Control Features.

McFarlane rod ends, conduit clamps, adel clamps, and wire clamps also available!

Less Detail

Question
Why is my new engine control too long/short? There are several things that could be different such as engine/aircraft modifications, rigging/clocking of control arm or adjustment of rod end will be needed, placement of clamps or brackets may be different, or a previous installation change such as routing from original.
What is the minimum bend radius for my engine control? McFarlane's Storage and Packaging Specification requires a specific packaging minimum radius based on the length of the control, type of wire used, and the configuration of the control end(s). Please contact us to determine the exact requirements for your specific control.
My Vernier-Assist Throttle control came apart during installation or maintenance. Can it be put back together? Yes, this is common and can put back together, provided no components are missing. Please watch the Vernier-Assist Assembly Video for details.
My Vernier-Assist Mixture control came apart during installation or maintenance. Can it be put back together? Yes, please return the control to McFarlane for repair.
I purchased a laser engraved knob and the thickness of the marking is very shallow. What kind of wear resistance can I expect? The laser marking does not harm the hard durable anodize coating on the aluminum knob. The CO2 laser process only bleaches the color from the anodizing leaving a silver white color that contrasts with the surrounding dyed anodize. The durability of the laser marked area is not affected by the laser. Our tests have shown that the laser process actually improves the corrosion resistance of the anodize layer. The CO2 laser engraves aluminum knobs by vaporizing the surface leaving a deep durable groove. This groove is then filled with a special paint for contrast. The result is a durable long lasting mark.
How do I trim my engine control to length? Please reference the Installation Instructions included with your new control.
How do I measure my control for custom manufacture? To learn how to measure controls for custom manufacture see; How to Measure Your Engine Control (Quadrant) How to Measure Your Vernier Engine Control (Knob)
How do I clean and sanitize a McFarlane Push-Pull Control? We make the following cleaning and sanitizing recommendations to be completed between flights: Recommended Cleaning Process 1. Put on clean disposable gloves prior to cleaning and disinfection. 2. Pull controls back to the fully retracted position to expose the full length of the control shafts. 3. Apply isopropyl alcohol to a clean microfiber towel. Do not spray any solution directly on the controls or any other surfaces or components in the aircraft. !!! WARNING: DO NOT USE BLEACH WIPES ON ANY MCFARLANE CONTROL !!! 4. Gently and thoroughly wipe down every control knob surface and control shaft. 5. Let cleaning solution dry on these surfaces (contact time). 6. Use a clean and dry microfiber cloth to wipe away any solution residue left on knob and control shaft surface. 7. Remove all gloves, towels, and cleaning supplies from the work area in the aircraft. Please contact McFarlane Sales directly at 866-920-2741 or 785-594-2741 or sales@mcfarlaneaviation.com if you have any additional questions regarding the disinfection of our controls.

Not finding what you're looking for?

Try one of the following: