McFarlane Aviation Products FAA-PMA Replacement Aircraft Parts

McFarlane Parts for Cessna

 
 Everything from Nose to Tail
 
Tail Cone Angle Kit
 
 
STC approved for Cessna aircraft
To learn more go to TAIL CONE ANGLE KIT.
Trim Wheel
Hardware and roll pins included.
 
 
To learn more go to Trim Wheel Shafts and Sprockets.
for Cessna 150-185
More Fuel System Components also available.
 
Trim Tab Actuator
Stronger metals and longer lasting coatings for increased service life!
 

 

FAA-PMA P/N MC1260074-1

 
 
Stabilizer Jack Screw Actuator Kit 
Improved material for extreme corrosion resistance
Now improved with a Black Max™ nitrocarburized screw assembly
Ultra-precision bearing with no backlash
 
For more information go to P/N 1111.
 
Patented Vernier-Assist™
Standard Vernier performance without the button! 
 

 

Now FAA-PMA Approved! 

  • Jam-proof safety
  • Precision power adjustments
  • Smooth friction control
  • Light and compact

 

 
 Hundreds of McFarlane manufactured contols also available. 
 
 
 
Click the banner to see all Landing Gear Components.
Cessna Landing Gear U-Bolt

FAA approved ICA allows 1200 hrs service life

extreme fatigue resistance

 

P/N MC0541153  

 

 Instructions for Continuous Airworthiness (ICA) 

 Shimmy Dampener Assembly

for Cessna 150, 152, 172, 175 and 182 aircraft 

 

 

  P/N MC0442512-1 

Fully repairable and self lubricating 

 

 

Shimmy Dampener Parts and Kits also available.

Cessna Torque Links

100& 200 Series

Ours are stronger, last longer, and cost less!    

 

 

 

Upper Torque Link

 

 

Lower Torque Link

 

 

 

For ordering information go to Torque Links.

 
More Landing Gear Components for Cessna Aircaft  

 

 

Click the banner to learn more.
 
Tail Slide Kits for 172 and 182-210 available. 

 

Brake and Wheel Components

 

 

Click the banner to learn more. 

 

 

 

 McFarlane Brake Assembly and Master Cylinder Seal Kits 
Save time and $$$

Kits contain just the parts you need 

 

    

 

To learn more go to McFarlane Brake Assembly and Master Cylinder Seal Kits  

 

Six new kits to replace P/N TCBMD
 
  • Expanded eligibility: 188 thru 210, 337, Caravan
  • Save $$$ with just the parts you need
  • McFarlane original kits
  • One kit required per brake assembly or master cylinder
  • Approved parts

Retractable Gear Brake Swivel 

 

Tire Balancer


 

 Flap Roller Kits

Your Solution to flap jamming and track wear

 

Upgrade kits include: 
Rollers, bushings, shims, spacers where required, MCSK100 Flap Service Kits, wear washers, hardware (nuts, bolts, washers), and a copy of SEB95-3 Rev 1. 
 
Make the installation of the aft flap roller, bushing, and washers easy!
Go to the 970 Flap Roller Installation Tool for more information.  For ordering information more go to Flap Roller Components and Kits.   
 
   

 

  

 

Don't just replace your old, worn Flap Rollers. Upgrade your Flap Control System!

 
  
FAA-PMA Approved Flap Tracks
Cessna 150 thru 210
Prevent dangerous and expensive binding problems!

 

20% stronger, with greater resistance to wear and stress cracking. 

Replace just the track, not the entire assembly! 

 

 

  

Determine if a Cessna flap track is worn beyond wear limits with the Flap Track Wear Gauge.

 

 

For ordering information, go to Flap System Components

 

 

Our Flap Indicator Cables actually work!

Our design has proven to outperform the originally installed cable assemblies.

Improved reliability in controlling your flaps with a low friction design.

 

 

 

 

For more information go to Flap Position Indicator Cables.

 

  • Reduced friction, longer life
  • Restore reliability
  • FAA-PMA Approved
  • Save $$$

 

 

 

Click the banner to learn more. 

 
FAA-PMA Approved Cabin Door Hinges
Cessna 170-175 series Aircraft
Save time and money!
 
 
 
 
FAA-PMA Hinge Pins
Cessna 170-175 Series Aircraft
Don't trust those old brass pins!
 
 
 
Convenient kit available: Kit P/N CDHP-KT-1 

 

Door Hinges for Cessna Caravan, 180, and 200 series aircraft also available.
 
For ordering information go to Door Hinges and Pins.

 

 

FAA-PMA Approved Cabin and Cargo Door Hinges
and Quick Removal Clevis Pin and Cotter Key
Cessna 180-210 series aircraft
Save time and money! 

 

For ordering information, go to Door Hinges and Pins.   

Coming Soon! Cessna 120, 140, and 150 Series 

 

 

 

FAA-PMA Approved Aluminum Aileron Hinge
Cessna 150-210 series aircraft
 
 
To see more go to Aileron Hinges
 
Cowl Flap, Main Gear Door, Spoiler, and Stabilator Tab Hinges also available. 

 

 

Click the banner to learn more.

 

 Improved Cessna 170/190/195 Elevator Trim Skins

Minor change results in major improvement! 
 

Original design:

Improved design:

For more information go to Elevator Trim Skins.

 

Aileron Skins

FAA-PMA Approved - Stronger Design - Unmatched Quality 

 

   

 

 

For more information go to Aileron Skins.

 

Flap Skins

FAA-PMA Approved - Stronger Design - Unmatched Quality 

 

   

For more information go to Flap Skins.

 

 Rudder Skins
New smooth elevator skins for 150 thru 175!    
 

 

For more information go to Rudder Skins.

Elevator Skins

New smooth elevator skins for 150 thru 172! 

   

 

For more information go to Elevator Skins.

 

 

World's Larges MT-Propeller Distributor
STCs for hundreds of other aircrafts are also available. Click here to see available MT props for your aircraft! 
Call our Propeller Specialists today at 866-717-1117
 

Click the banner to learn more.

 

 

Check out our extensive inventory of 
 

 

 

Share this article: